 | Single Station Control, SS-1R 121001 Silver/Black/ 121002 White $40.00 each
Standard with most Draper electrically operated screens. 3-position rocker switch accepts 115v current. Switch operation is sustained contact.
Complete with single-gang cover plate. UL listed. See below for Access Sonata and Access MultiView switch information. Technical Data Sheet
Also available in 220v. Technical Data Sheet CE
115 Volt Multiple Station Controls 2-station control MS-3R & MS-4R 121002 $81.00 each Control station MS-4R 1210058 $40.00 each
MS-3R, MS-4R is —identical in appearance to Single Station Control, above. Automatic override allows only one signal to reach the motor when switches are operated simultaneously.
Also available in 220v current Technical Data Sheet | | |
| | |
| |
| Low Voltage Switch with low voltage module
3-button switches are labeled "up", "down" and "stop". No preset sequence—push any button for desired function. Switch must be used with Low Voltage Control Unit. Neutral decorator face plates for flush wall mounting. .Optional for all Draper motorized screens, except Access Sonata. Technical Data Sheet for LVCIII Technical Data Sheet for switch For remote control options you must add the following items to the 121057 above - For RF remote control options 121062 $179.00
- For IR remote control options 121065 $79.00
| | |
| |
 | MC1 Motor Control Board C156.070 $245.00 each
Provides multiple options for screen, lift or shade motors. This simply designed but powerful control board accepts 2-way serial communication, infrared commands via IR receiver, and relay closures found in home integration systems. Radio frequency is also available. Available as an external option for all motorized screens, AeroLifts, Micro Projector Lift and LCD Lift. Can also be factory installed in some screens. | | |
| |
 | Radio Frequency Remote Control, WRT/R 121062 $179.00 each
Hand-held transmitter. 3-button control lets you change direction or adjust format at any point. Receiver plugs into the Draper low-voltage control unit, and must be ordered with it. Technical Data Sheet | | |
| |
 | Infrared Remote Control, IRT/R 121065 $79.00 each
Infrared transmitter and receiver. 3-button operation for instant access to "up", "down", and "stop" functions. Fully compatible with "learnable" IR master control systems. Receiver plugs into the Draper low-voltage control unit, and must be ordered with it. Technical Data Sheet | | |
| |
Key Operated Power Supply Switch, KS-1 121017 $59.00 each
Useful with any control system for a Draper electrically operated projection screen--low voltage or 115v. Switch mounts next to operating switch and controls power to it. Technical Data Sheet | | |
| |
 | Locking Switch Cover Plate, SP-KPS-I 121019 $81.00 each
115v 3-position control switch for limited access. Cover plate and locking switch cover are brushed stainless steel. Two keys furnished. Technical Data Sheet | | |
| |
 | Key Operated 3-Position Switch KS3 121018 $70.00
Similar to Draper's standard 3-position control switch, but requires a key for operation. Low voltage or 115v. Two keys furnished. KS3 Technical Data Sheet SP KSM Technical Data Sheet Momentary | | |
| |
 | Individual/Group Control for more than one screen per room IGC-3N1
The IGC-3N1 is a specialized low voltage control system designed for rooms with two or more motorized screens. Depending on the switches and remote transmitters that are ordered with the control, it is possible to operate screens in tandem, separately or both. Operates up to three motors individually or simultaneously. | | |
| | |
 | *Video Interface Control VIC12 /121024 $98.00 VIC115/121026 $98.00 VIC-12 KIT/ 121033 $98.00
Allows screen to be controlled by projector switch--when the projector comes on, the screen descends automatically. Model VIC115 integrates screen operation with a Draper video projector lift, or a video projector or tuner with a 115v switched outlet. Models VIC12 & VIC6 interface screen operation with a video projector or tuner featuring a 12v switched outlet. The VIC115, VIC12 & VIC6 may be purchased with an override switch (VIC-OS), permitting independent operation. A VIC is not compatible with an LVC-III, built-in or otherwise.
Technical Data Sheet VIC6, Technical Data Sheet VIC12, Technical Data Sheet VIC115 | | |
| | |
| |
 | Controls for Access Sonata
The standard control switch for the Access Sonata is a programmable low voltage 6-button wall switch that Draper presets with four format settings. Change to any format at the touch of one button! The Access Sonata standard control switch is compatible with the Sonata Infrared Remote Control Kit (ASON-IRT), and Sonata Projector Interface 12v and 6v (ASONPI-12 and ASONPI-6). | | |
| | |
 | VIC Override Switch
The VIC-OS acts to lower a product when that product is normally controlled by one of the VICs, and it is not desired to activate that VIC. For example, a screen is controlled by a VIC-12, which activates upon the turning on of a video projector. Occasionally, an overhead or slide projector is used instead of the video projector. On these occasions, it is not desirable to turn on the video projector in order to lower the screen. This is where the VIC-OS could be used to lower the screen instead.Technical Data Sheet | | |
| |
 | Controls for MultiView
Both screen and masking system are independently controlled, each using any standard or optional control offered above. Two, SS-1Rs are standard. Or, select AMV-C, a low voltage control that allows both motors to be controlled by independent 3-button switches in a single box. | | |
| |
| |
